Paper Plate Snake

How to Make

1. Using a pencil, on the underside of a paper plate draw from the outside edge a spiral shape going round twice.
2. In the middle, draw a rounded diamond shape for the snake's head attached to the end of the spiral.
3. Using scissors, carefully to cut out the spiral snake. Once the snake is cut out, you can trim any areas around the snake's head to make the head more free from the snake's body.
4. Using a pencil, evenly mark out band sections on the entire snake for colouring. Starting from the inside, colour these bands with rainbow colours using broad tip marker pens as shown.
5. On each coloured band, stick a row of mosaic stick-on stones so it matches the same colour.
6. Stick 2 big wiggle eyes onto the head. Cut a rectangle shape roughly 1cm (W) by 12cm (L) from red card. Cut a small inward facing triangle from one end of the rectangle to make a forked snake tongue.
7. Wrap the snake's tongue between your fingers to make it look wiggly. Stick the tongue to the bottom of the snake's head using clear sticky tape or glue dot.
8. Cut a piece of white elastic roughly 10cm long, loop and secure with a double knot. Attach the knotted end of the loop onto the bottom of the snake's head and stick down using a piece of clear sticky tape or glue dot.

Step 1

Step 2

Step 3