Bee Slime

How to Make

1. Add approximately eight tablespoons of PVA glue to the mixing bowl. Then add about half of that amount of shaving foam.
2. Then add a teaspoon of baking soda and some yellow food colouring and mix together until the mixture is all the same colour.
3. Add about one tablespoon of contact lens solution to the mixture and start mixing it together. It should start to stick together. Continue to add contact lens solution until the slime has formed and is no longer sticky to touch.
4. Take the slime out of the bowl and place to one side. Then repeat steps 1-3 using black food colouring.
5. Stretch out the yellow and black slime and lay them next to each other on a flat surface. Then twist them together to make stripy yellow and black slime.
6. Put the slime into the jar. Then take a black pipe cleaner and cut it in half, and place the ends of each pipe cleaner into the top of the jar at the back. Put the lid onto the jar, over the top of the pipe cleaners, to hold them in place.
7. Bend the pipe cleaners upwards and trim them to the desired length. Then bend the ends over to make the bee's antenna.
8. Take a sheet of pastel blue paper and cut out a wing shape that is wider than the jar. Make sure the two wings are joined together in the middle as this will help to stick it to the jar.
9. Stick the wings to the back of the jar using double sided tape.
10. Stick two jumbo wiggle eyes to the front of the jar and use a black glass pen to draw a smile underneath the eyes.

Step 1

Step 2

Step 3