Lino Print Wall Art

These framed lino prints make lovely personalised gifts. For birthdays use numbers filled with patterns, for weddings use initials, or create the whole alphabet and your options will be endless…

Skill Level

Beginner

Time to Make

1 hour

Lino Print Wall Art

How to Make

  1. Cut your piece of lino to fit within the frame/ mount you intend to use, to ensure your print will fit! Use pencil to draw your design onto the lino sheet. Remember letters and numbers need to be in reverse!
  2. Heat the lino briefly with a hairdryer to help soften it and aid with the cutting process.
  3. Using the lino cutter, carefully cut your design, small amounts at a time. Either do this as you go to create a random pattern or use the picture as your guide, mapping it out with a biro onto the lino to help. Place the lino on a flat surface and cut away from you.
  4. Set up your printing station. You will need a tray with a small amount of printing ink to initially coat the roller, and a piece of plastic film next to it. You will need two rollers - one for ink and one to keep dry to help with printing, plus a small pile of paper for test prints.
  5. Coat the roller in the ink in the tray, and then move onto the plastic film and roll back and forth until the roller is covered in a very thin layer of ink. You should hear constant 'tacky' noise. If not, the ink is too thick.
  6. Roll a thin layer of ink onto your lino shape. Place it onto the centre of the card and roll over gently with a clean roller to ensure the whole design has made contact with the card. Carefully remove it and allow to dry overnight. Thoroughly wash and DRY the lino and equipment between colours.
  7. Once dry, mount and frame.

Step 1

Lino Print Wall Art

Step 2

Lino Print Wall Art

Step 3

Lino Print Wall Art